|
|
Description:
|
atmfAtmServiceLayer2ProtocolId OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object shall be used to select the user plane layer 2
protocol (if any) to be used above the AAL. The first octet
of this object shall be encoded as follows. Bits 5-7 (i.e.
the three most significant bits) shall be set to 0; any other
values shall be ignored. Bits 0-4 (i.e. the five least significant
bits) shall be encoded as shown in the entry for 'User information
layer 2 protocol (octet 6)' in Table 4-10/Q.2931. However, if no
user plane layer 2 protocol is present above the AAL, then the
first (and only) octet shall be encoded as '0b00000000'. If the
encoding of the first octet requires subsequent octets, then bit 7
(i.e., the most significant bit) of each of these octets shall be
set to 0; however, if it is set to 1, it shall be ignored. Bits 0-6
shall be encoded according to table 4-10/Q.2931. If more than one
subsequent octet is needed, then octets shall appear in the order
shown in figure 4-16/Q.2931."
|
|
|
|
