|
|
Description:
|
nvmGcmGlobalCfgAutoActSelMode OBJECT-TYPE
SYNTAX INTEGER {
hwCfgAutoSelect (1),
disabled (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"NAME = ;
DESC = This object is used to set the mode of the unit \
activation after reading the configuration file. \
disabled (2): The GCM does not change the objects \
nvmGcmUnitAdminStatus in the GCM Unit \
table after reading the configuration file. \
hwCfgAutoSelect (1): After reading the configuration \
file, the GCM activates only one of the three GCM \
Units depending on the hardware configuration. \
The stored configuration for the object \
nvmGcmUnitAdminStatus will be ignored. \
The following association between the GCM Unit \
rows and hardware configuration exists: \
Row 1: Port 2 and (optional) 3 with Serial WAN \
card; Port 2 is the Primary port. \
Row 2: Port 2 with Serial WAN card, Port 3 with \
ISDN card, Port 2 is the Primary port. \
Row 3: Port 2 and (optional) 3 with ISDN, Port 2 \
is the Primary port. \
(Configuration);
HELP = ;
CAPABILITIES = NET_CFG, VPN_DISP."
|
|
