Main page
OID Repository
https://oid-base.com
Display OID:

{iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) 326 systems(2) external(20) dlink(1) golf(2) golfcommon(2) marconi-mgmt(2) es2000Mgmt(28) 2 swL2PortMgmt(4) swL2PortCtrlTable(2) swL2PortCtrlEntry(1) swL2PortCtrlPriority(10)}

swL2PortCtrlPriority(10)

 
 

OID description



 
OID: (ASN.1 notation)
(dot notation)
(OID-IRI notation)

Description:

swL2PortCtrlPriority OBJECT-TYPE
SYNTAX INTEGER {
other(1),
default(2),
force-low-priority(3),
force-high-priority(4),
notAvailable(5)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The priority queueing for packets received on this port, except for
BPDU/IGMP packets and packets with unknown unicast destination address.
IGMP and BPDU packets are always routed with high priority; packets with
unknown unicast destination addresses are always routed with low priority.
Other packets follow the rules below:
other(1) - this entry is currently in use but the conditions under
which it will remain so are different from each of the
following values.
default(2) - A packet is normally classified as low priority,
unless at least one of the following is true:
(a)The packet contained a TAG (per 802.1Q definition)
with the priority greater or equal to 4.
(b)The address-table entry for the destination address
had Pd=HIGH.
force-low_priority(3) - A packet is normally classified as low priority.
force-high_priority(4) - A packet is normally classified as high priority."



Classification:

MIB object for network management

 
See classes of OIDs

Note to implementers:




 
 
Short link:


Parent OID: swL2PortCtrlEntry(1) First sibling OID: swL2PortCtrlUnitIndex(1) Previous sibling OID: swL2PortCtrlLockState(9) Next sibling OID: swL2PortCtrlStpState(11) Last sibling OID: swL2PortCtrlClearCounter(15)