Main page
OID Repository
https://oid-base.com
Display OID:

{iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) 326 systems(2) external(20) dlink(1) golf(2) golfcommon(2) marconi-mgmt(2) es1300Series(26) swPortPackage(3) swPortCtrlTable(2) swPortCtrlEntry(1) swPortCtrlPriority(8)}

swPortCtrlPriority(8)

 
 

OID description



 
OID: (ASN.1 notation)
(dot notation)
(OID-IRI notation)

Description:

swPortCtrlPriority OBJECT-TYPE
SYNTAX INTEGER {other(1), not-override-low-priority(2), not-override-high-priority(3), override-low-priority(4), override-high-priority(5)}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The priority queueing for packets received on this port, except for
BPDU/IGMP packets and packets with unknown unicast destination address.
IGMP and BPDU packets are always routed with high priority; packets with
unknown unicast destination addresses are always routed with low priority.
Other packets follow the rules below:
other(1) - this entry is currently in use but the conditions under
which it will remain so are different from each of the
following values.
not_override-low_priority(2) - A packet is normally classified as low priority
,unless at least one of the following is true:
.The packet contained a TAG (per 802.1Q definition) with the
priority greater or equal to 4.
.The address-table entry for the destination address had Pd=HIGH.
.The address-table entry for the source address had Pd=HIGH.
not_override-high_priority(3) - A packet is normally classified as high
priority.
override-low_priority(4) - A packet is normally classified as low priority.
override-high_priority(5) - A packet is normally classified as high
priority."



Classification:

MIB object for network management

 
See classes of OIDs

Note to implementers:




 
 
Short link:


Parent OID: swPortCtrlEntry(1) First sibling OID: swPortCtrlIndex(1) Previous sibling OID: swPortCtrlLockState(7) Next sibling OID: swPortCtrlStpState(9) Last sibling OID: swPortCtrlBroadcastFallingAct(14)