|
|
Description:
|
swL2PortCtrlPriority OBJECT-TYPE
SYNTAX INTEGER {
other(1),
default(2),
force-low-priority(3),
force-high-priority(4),
notAvailable (5)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The priority queueing for packets received on this port, except for
BPDU/IGMP packets and packets with unknown unicast destination address.
IGMP and BPDU packets are always routed with high priority; packets with
unknown unicast destination addresses are always routed with low priority.
Other packets follow the rules below:
other(1) - this entry is currently in use but the conditions under
which it will remain so are different from each of the
following values.
default(2) - A packet is normally classified as low priority
,unless at least one of the following is true:
(a)The packet contained a TAG (per 802.1Q definition) with the
priority greater or equal to 4.
(b)The address-table entry for the destination address had Pd=HIGH.
force-low_priority(3) - A packet is normally classified as low priority.
force-high_priority(4) - A packet is normally classified as high priority."
|
|
|
|
|
|