|
|
Description:
|
vSerialConnectorType OBJECT-TYPE
SYNTAX INTEGER {
other(1),
no-init(2),
dce(3),
dte(4)}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Displays whether this port is configured as DCE
(Data Communications Equipment) or DTE (Data
Terminal Equipment). When a WAN (serial) port
is configured as DCE, it generates transmit and
receive clocks at discrete frequencies. Most
frequencies below 100 kbps can be generated
directly. Above 100 kbps, however, the system
will select the frequency closest to one
specified in the table on page 3-107 of the
Vitalink TransLAN/TransRING Reference Manual
(part number 014721). The actual, rather than
specified, frequency will be displayed as the
Bit rate value. When a T1 link is configured
utilizing a Bell 306-compatible modem, the
configured bit rate should be 1344000, versus
1544000, as this is the effective bit rate of
the link after the framing has been stripped."
|
|
|
|
|
|
