|
|
|
|
Description:
|
agDiffState OBJECT-TYPE
SYNTAX INTEGER {diff(1), flashdiff(2), idle(3), inprogress(4), complete(5)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When this object is read the current state is returned.
idle(3) indicates that there is no diff in progess.
complete(5) indicates that the last diff operation is completed.
Setting the value to diff(1), will start a new diff operation
Diff compares the new configuration with the current configuration
and shows the pending configuration changes.
Setting the value to flashdiff(1), will start a new diff operation.
flashdiff compares new configuration with the flash configuration.
To read the configuration changes use the agDiffTable once the
state of this variable returns complete.
Once the agDiffTable is read the state should be set back to 'idle'
which frees the diff buffer and others can issue a diff command via
SNMP."
|
|
Disclaimer: The owner of this site does not warrant or assume any liability or responsibility for the accuracy, completeness, or usefulness of any information available on this page (for more information, please read the complete disclaimer).
All rights reserved © 2007-2024 |
iso(1)
