Description:
|
unit2SensorType OBJECT-TYPE
SYNTAX INTEGER {
notAvail (1),
failure (2),
overflow (3),
access (4),
vibration (5),
motion (6),
smoke (7),
airFlow (8),
type6 (9),
temperature(10),
current4to20(11),
humidity(12),
userNO (13),
userNC (14),
lock (15),
unlock (16),
voltOK (17),
voltage (18),
fanOK (19),
readerKeypad (20),
dutyPWM (21),
fanStatus (22),
leakage (23),
warningRTT (24),
alarmRTT (25),
filterRTT (26),
heatflowRCT (27),
alarmRCT (28),
warningRCT (29),
currentPSM (30),
statusPSM (31),
positionPSM (32),
airFlap (33),
acoustic (34),
detACfault (35),
detACfirstAlarm (36),
detACmainAlarm (37),
rfidTag (38),
rpm11LCP (40),
rpm12LCP (41),
rpm21LCP (42),
rpm22LCP (43),
rpm31LCP (44),
rpm32LCP (45),
rpm41LCP (46),
rpm42LCP (47),
airTemp11LCP (48),
airTemp12LCP (49),
airTemp21LCP (50),
airTemp22LCP (51),
airTemp31LCP (52),
airTemp32LCP (53),
airTemp41LCP (54),
airTemp42LCP (55),
temp1LCP (56),
temp2LCP (57),
waterInTemp (58),
waterOutTemp (59),
waterFlow (60),
fanSpeed (61),
valve (62),
statusLCP (63),
waterDelta (64),
valveActual (65),
contrTemp2 (66),
condensateDuration (67),
condensateCycles (68),
totalKWhPSM (72),
totalKWPSM (73),
frequencyPSM (74),
voltagePSM (75),
voltStatusPSM (76),
amperePSM (77),
ampStatusPSM (78),
kWPSM (79),
kWhPSM (80),
kWhTempPSM (81),
temperatureWL (100),
temperature1WL (101),
humidityWL (102),
accessWL (103),
userNOWL (104),
userNCWL (105),
analogWL (106)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Type of sensor which is connected to sensor unit 2 to sensor[unit2SensorIndex]
1: no sensor connected
2: sensor failure
3: value overflow
4: sensor type 1, access sensor
5: sensor type 2, vibration sensor
6: sensor type 3, motion sensor
7: sensor type 4, smoke sensor
8: sensor type 5, air flow sensor
9: sensor type 6, reserved
10: sensor type 7, temperature sensor
11: sensor type 8, 4..20mA sensor
12: sensor type 9, humidity sensor
13: user sensor with normally opened contact
14: user sensor with normally closed contact
15: door locked sensor from locking device
16: remote unlock sensor (e.g. external keypad)
17: voltage sensor, indicates status of main voltage
18: voltage value
19: fan status
20: cardreader or keypad, connected to I2C port
21: duty cycle of fan, FCS-Unit
22: status of fan, FCS-Unit
23: leakage sensor
24: warning, RittalTopTherm(RTT)-Unit
25: alarm, RittalTopTherm-Unit
26: temperature difference filter monitor, RTT-Unit
27: heatflow RCT-Unit
28: alarm RCT-Unit
29: warning RCT-Unit
30: actual current*10, PSM-Unit
31: status PSM-Unit
32: position PSM-Unit, normal/reversed = circuit 1/2
33: air Flap
34: acoustic sensor
35: DET-AC fault (extinguisher)
36: DET-AC first alarm (extinguisher)
37: DET-AC main alarm (extinguisher)
38: DRC: RFID Tag
40-47: RPM Fan 1.1 - Fan 4.2, LCP
48-55: Air temperature 1.1 - 4.2, LCP
56,57: actual temperature 1,2, LCP
58: water inlet temperature, LCP
59: water outlet temperature, LCP
60: water flow
61: fan speed (desired value)
62: status valve, LCP
63: status LCP
64: temperature difference water temperatures
65: control temperature 1, LCP
66: control temperature 2, LCP
67: condensate pump, duration, LCP
68: condensate pump, cycles, LCP
72: total energy*10 (kWh), PSM
73: total power*10 (kW), PSM
74: frequency*10 (Hz), PSM
75: voltage*10 (V), PSM
76: voltage status, PSM
77: current*10 (A), PSM
78: current status, PSM
79: power*10 (kW) per phase, PSM
80: energy*10 (kWh) per phase, PSM
81: temporary energy*10 (kWh) per phase, PSM
100: temperature sensor, wireless
101: temperature sensor (combi), wireless
102: humidity sensor, wireless
103: access sensor, wireless
104: user sensor with normally opened contact, wireless
105: user sensor with normally closed contact, wireless
106: analog sensor 4..20mA, wireless"
|
|
