Description:
|
xcmHrMIBCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statements for SNMP management agents that
implement the Host Resources Extensions MIB."
MODULE -- this module
MANDATORY-GROUPS {xcmHrGeneralGroup, xcmHrSuppliesGroup, xcmHrDevInfoGroup}
GROUP xcmHrDevHelpGroup
DESCRIPTION
"Implementation of this group is DEPRECATED (as of XCMI v4.1)
and conforming implementations SHOULD use 'deviceHelp...'
details in 'xcmHrDevDetailTable' instead.
Usage: Conforming management agents which implement this
group SHALL also implement the Comms Address group
of the XCMI Comms Engine MIB and SHALL use 'XcmSecUserRole'
values from XCMI Security TC in 'xcmCommsAddressUserRole'.
Note: 'sysContact' in IETF MIB-II (RFC 1213) provides a
low-cost alternative for systems which do NOT implement
complex device help (contact) info via SNMP."
GROUP xcmHrDevMgmtGroup
DESCRIPTION
"Implementation of this group is conditionally mandatory, ie,
mandatory for systems which implement simple device
management via SNMP, and optional for all other systems."
GROUP xcmHrDevPowerGroup
DESCRIPTION
"Implementation of this group is conditionally mandatory, ie,
mandatory for systems which implement device power profile
management via SNMP, and optional for all other systems.
Note: Systems are free to decompose the hierarchy of their
hardware containment to any depth via 'hrDeviceTable' and
and 'xcmHrDev[Info|Power]Table' entries, in order to manage
their power profiles at any granularity."
GROUP xcmHrDevTrafficGroup
DESCRIPTION
"Implementation of this group is conditionally mandatory, ie,
mandatory for systems which implement device traffic
statistics via SNMP, and optional for all other systems."
GROUP xcmHrSystemFaultGroup
DESCRIPTION
"Implementation of this group is conditionally mandatory, ie,
mandatory for systems which implement persistent system
fault logs via SNMP, and optional for all other systems."
GROUP xcmHrDevCalendarGroup
DESCRIPTION
"Implementation of this group is conditionally mandatory, ie,
mandatory for systems which implement device calendar
management via SNMP, and optional for all other systems."
GROUP xcmHrSWRunGroup
DESCRIPTION
"Implementation of this group is conditionally mandatory, ie,
mandatory for systems which support running software
extensions via SNMP, and optional for all other systems.
Usage: Conforming management agents which implement this
group SHALL also implement the Software Running
group of the IETF Host Resources MIB (RFC 2790)
and MAY also support secure 'service' configuration
via the XCMI Security MIB."
GROUP xcmHrSWInstalledGroup
DESCRIPTION
"Implementation of this group is conditionally mandatory, ie,
mandatory for systems which support installed software
extensions via SNMP, and optional for all other systems.
Usage: Conforming management agents which implement this
group SHALL also implement the Software Installed
group of the IETF Host Resources MIB (RFC 2790)
and MAY also support secure 'service' configuration
via the XCMI Security MIB."
GROUP xcmHrDevDetailGroup
DESCRIPTION
"Implementation of this group is conditionally mandatory, ie,
mandatory for systems which implement device detail info
via SNMP, and optional for all other systems."
GROUP xcmHrStorageGroup
DESCRIPTION
"Implementation of this group is conditionally mandatory, ie,
mandatory for systems which support storage extensions info
via SNMP, and optional for all other systems.
Usage: Conforming management agents which implement this
group SHALL also implement the Storage
group of the IETF Host Resources MIB (RFC 2790)
and MAY also support secure 'service' configuration
via the XCMI Security MIB."
GROUP xcmHrStorageDetailGroup
DESCRIPTION
"Implementation of this group is conditionally mandatory, ie,
mandatory for systems which implement storage detail info
via SNMP, and optional for all other systems."
GROUP xcmHrDevCoverGroup
DESCRIPTION
"Implementation of this group is conditionally mandatory, ie,
mandatory for systems which implement device cover and/or
interlock info via SNMP, and optional for all other systems."
GROUP xcmHrDevAlertGroup
DESCRIPTION
"Implementation of this group is conditionally mandatory, ie,
mandatory for systems which implement device alerts
via SNMP, and optional for all other systems."
GROUP xcmHrConsoleScreenGroup
DESCRIPTION
"Implementation of this group is conditionally mandatory, ie,
mandatory for systems which implement system local console
management via SNMP, and optional for all other systems."
GROUP xcmHrConsoleTabGroup
DESCRIPTION
"Implementation of this group is conditionally mandatory, ie,
mandatory for systems which implement system local console
management via SNMP, and optional for all other systems."
GROUP xcmHrConsoleGroup
DESCRIPTION
"Implementation of this group is conditionally mandatory, ie,
mandatory for systems which implement local console
management via SNMP, and optional for all other systems."
OBJECT xcmHrGeneralRowStatus
SYNTAX INTEGER {active(1)} -- subset of RowStatus
DESCRIPTION
"It is conformant to implement this object as read-only, and
only one of the enumerated values for the 'RowStatus' textual
convention need be supported, specifically: active(1)."
OBJECT xcmHrDevInfoRowStatus
SYNTAX INTEGER {active(1)} -- subset of RowStatus
MIN-ACCESS read-only
DESCRIPTION
"It is conformant to implement this object as read-only, and
only one of the enumerated values for the 'RowStatus' textual
convention need be supported, specifically: active(1)."
OBJECT xcmHrDevInfoName
SYNTAX XcmFixedLocaleDisplayString (SIZE (0..32))
MIN-ACCESS read-only
DESCRIPTION
"It is conformant to implement this object as read-only, and
only 32 octets maximum string length need be supported."
OBJECT xcmHrDevInfoSerialNumber
SYNTAX XcmFixedLocaleDisplayString (SIZE (0..32))
MIN-ACCESS read-only
DESCRIPTION
"It is conformant to implement this object as read-only, and
only 32 octets maximum string length need be supported."
OBJECT xcmHrDevInfoRealization
MIN-ACCESS read-only
DESCRIPTION
"It is conformant to implement this object as read-only."
OBJECT xcmHrDevInfoInstallDate
MIN-ACCESS read-only
DESCRIPTION
"It is conformant to implement this object as read-only."
OBJECT xcmHrDevInfoNextDeviceIndex
MIN-ACCESS read-only
DESCRIPTION
"It is conformant to implement this object as read-only."
OBJECT xcmHrDevInfoPreviousDeviceIndex
MIN-ACCESS read-only
DESCRIPTION
"It is conformant to implement this object as read-only."
OBJECT xcmHrDevInfoPhysicalDeviceIndex
MIN-ACCESS read-only
DESCRIPTION
"It is conformant to implement this object as read-only."
OBJECT xcmHrDevHelpRowStatus
SYNTAX INTEGER {active(1)} -- subset of RowStatus
MIN-ACCESS read-only
DESCRIPTION
"It is conformant to implement this object as read-only, and
only one of the enumerated values for the 'RowStatus' textual
convention need be supported, specifically: active(1)."
OBJECT xcmHrDevHelpOperatorMessage
SYNTAX XcmFixedLocaleDisplayString (SIZE (0..32))
MIN-ACCESS read-only
DESCRIPTION
"It is conformant to implement this object as read-only, and
only 32 octets maximum string length need be supported."
OBJECT xcmHrDevHelpProblemMessage
SYNTAX XcmFixedLocaleDisplayString (SIZE (0..32))
MIN-ACCESS read-only
DESCRIPTION
"It is conformant to implement this object as read-only, and
only 32 octets maximum string length need be supported."
OBJECT xcmHrDevHelpCommsAddressIndex
MIN-ACCESS read-only
DESCRIPTION
"It is conformant to implement this object as read-only."
OBJECT xcmHrDevMgmtRowStatus
SYNTAX INTEGER {active(1)} -- subset of RowStatus
MIN-ACCESS read-only
DESCRIPTION
"It is conformant to implement this object as read-only, and
only one of the enumerated values for the 'RowStatus' textual
convention need be supported, specifically: active(1)."
OBJECT xcmHrDevMgmtCommandRequest
SYNTAX INTEGER {none(1), -- no operation
startup(2), -- to 'running'
resetWarning(3), -- from 'warning' to 'running'
-- test(4), - to 'testing' immediately
shutdown(5), -- to 'down' immediately
-- quiesce(6), - to 'down' gracefully
resetCounters(7), -- reset all device counters
resetWarm(8), -- warm restart to 'running'
resetCold(9), -- cold restart to 'running'
resetFactory(10), -- factory defaults cold restart
-- flushInput(11), - flush all input
-- flushOutput(12), - flush all output
-- flushInOut(13), - flush all input and output
-- manage(14), - manage command, any state
-- refresh(15), - refresh device w/out reset
-- warmUp(16), - 'standby' to 'ready' ONLY
-- coolDown(17), - 'ready' to 'standby' ONLY
-- energySave(18), - 'standby' to 'sleep' ONLY
-- wakeUp(19), - 'sleep' to 'standby' ONLY
-- powerToReady(20), - 'standby|sleep' to 'ready'
-- powerToStandby(21), - 'ready|sleep' to 'standby'
-- powerToSleep(22), - 'ready|standby' to 'sleep'
-- POSIX - Device level operations (on host system)
-- deviceCreate(1301), - 'pdcreate' (create device)
-- deviceDelete(1302), - 'pddelete' (delete device)
-- deviceList(1303), - 'pdls' (list svc attributes)
-- deviceSet(1304), - 'pdset' (set svc attributes)
-- deviceClean(1305), - 'pdclean' (remove all jobs)
deviceDisable(1306), -- 'pddisable' (stop new jobs)
deviceEnable(1307), -- 'pdenable' (allow new jobs)
devicePause(1308), -- 'pdpause' (pause device)
deviceResume(1309), -- 'pdresume' (resume device)
deviceShutdown(1310), -- 'pdshutdown' (end device)
-- deviceQueueList(1311), - 'pdq' (list device job queue)
-- XCMI - Device level extensions (on host system)
-- deviceManage(2301), - manage device object(s)
-- deviceRestart(2302), - restart device
-- deviceInstall(2321), - install device object(s)
-- deviceUpgrade(2322), - upgrade device object(s)
-- deviceBackup(2323), - backup device object(s)
-- deviceRestore(2324), - restore device object(s)
-- deviceConfigure(2325), - configure device object(s)
-- deviceDiagnose(2326), - diagnose device object(s)
deviceResetCounters(2331), -- reset device counters
deviceResetWarm(2332), -- warm reset (no power cycle)
deviceResetCold(2333), -- cold reset (w/ power cycle)
deviceResetFactory(2334) -- factory defaults reset
-- deviceLogin(2341), - login w/ authentication
-- deviceLogout(2342) - logout w/ authentication}
DESCRIPTION
"It is conformant to implement this object as follows:
only the above subset of operations need be supported."
OBJECT xcmHrDevMgmtCommandData
SYNTAX XcmHrDevMgmtCommandData (SIZE (0..1))
DESCRIPTION
"It is conformant to implement this object as follows:
only 1 octet maximum string length need be supported.
Usage: Conformant implementations MUST encrypt passwords, keys,
and other security information stored in this string object."
OBJECT xcmHrDevMgmtUserPassword
SYNTAX OCTET STRING (SIZE (0..32))
MIN-ACCESS read-only
DESCRIPTION
"It is conformant to implement this object as read-only, and
only 32 octets maximum string length need be supported.
Usage: Conformant implementations MUST encrypt passwords, keys,
and other security information stored in this string object."
OBJECT xcmHrDevMgmtOperatorPassword
SYNTAX OCTET STRING (SIZE (0..32))
MIN-ACCESS read-only
DESCRIPTION
"It is conformant to implement this object as read-only, and
only 32 octets maximum string length need be supported.
Usage: Conformant implementations MUST encrypt passwords, keys,
and other security information stored in this string object."
OBJECT xcmHrDevMgmtAdminPassword
SYNTAX OCTET STRING (SIZE (0..32))
MIN-ACCESS read-only
DESCRIPTION
"It is conformant to implement this object as read-only, and
only 32 octets maximum string length need be supported.
Usage: Conformant implementations MUST encrypt passwords, keys,
and other security information stored in this string object."
OBJECT xcmHrDevPowerRowStatus
SYNTAX INTEGER {active(1)} -- subset of RowStatus
MIN-ACCESS read-only
DESCRIPTION
"It is conformant to implement this object as read-only, and
only one of the enumerated values for the 'RowStatus' textual
convention need be supported, specifically: active(1)."
OBJECT xcmHrDevPowerWarmUpSupport
MIN-ACCESS read-only
DESCRIPTION
"It is conformant to implement this object as read-only."
OBJECT xcmHrDevPowerCoolDownSupport
MIN-ACCESS read-only
DESCRIPTION
"It is conformant to implement this object as read-only."
OBJECT xcmHrDevPowerEnergySaveSupport
MIN-ACCESS read-only
DESCRIPTION
"It is conformant to implement this object as read-only."
OBJECT xcmHrDevPowerTimeUnit
MIN-ACCESS read-only
DESCRIPTION
"It is conformant to implement this object as read-only."
OBJECT xcmHrDevPowerWarmUpDelay
MIN-ACCESS read-only
DESCRIPTION
"It is conformant to implement this object as read-only."
OBJECT xcmHrDevPowerWarmUpDuration
MIN-ACCESS read-only
DESCRIPTION
"It is conformant to implement this object as read-only."
OBJECT xcmHrDevPowerCoolDownDelay
MIN-ACCESS read-only
DESCRIPTION
"It is conformant to implement this object as read-only."
OBJECT xcmHrDevPowerCoolDownDuration
MIN-ACCESS read-only
DESCRIPTION
"It is conformant to implement this object as read-only."
OBJECT xcmHrDevPowerEnergySaveDelay
MIN-ACCESS read-only
DESCRIPTION
"It is conformant to implement this object as read-only."
OBJECT xcmHrDevPowerEnergySaveDuration
MIN-ACCESS read-only
DESCRIPTION
"It is conformant to implement this object as read-only."
OBJECT xcmHrDevPowerWakeUpSupport
MIN-ACCESS read-only
DESCRIPTION
"It is conformant to implement this object as read-only."
OBJECT xcmHrDevPowerWakeUpDelay
MIN-ACCESS read-only
DESCRIPTION
"It is conformant to implement this object as read-only."
OBJECT xcmHrDevPowerWakeUpDuration
MIN-ACCESS read-only
DESCRIPTION
"It is conformant to implement this object as read-only."
OBJECT xcmHrDevPowerShutdownDelay
MIN-ACCESS read-only
DESCRIPTION
"It is conformant to implement this object as read-only."
OBJECT xcmHrDevPowerShutdownDuration
MIN-ACCESS read-only
DESCRIPTION
"It is conformant to implement this object as read-only."
OBJECT xcmHrDevPowerStartupDelay
MIN-ACCESS read-only
DESCRIPTION
"It is conformant to implement this object as read-only."
OBJECT xcmHrDevPowerStartupDuration
MIN-ACCESS read-only
DESCRIPTION
"It is conformant to implement this object as read-only."
OBJECT xcmHrDevTrafficRowStatus
SYNTAX INTEGER {active(1)} -- subset of RowStatus
MIN-ACCESS read-only
DESCRIPTION
"It is conformant to implement this object as read-only, and
only one of the enumerated values for the 'RowStatus' textual
convention need be supported, specifically: active(1)."
OBJECT xcmHrDevTrafficInputSupport
MIN-ACCESS read-only
DESCRIPTION
"It is conformant to implement this object as read-only."
OBJECT xcmHrDevTrafficOutputSupport
MIN-ACCESS read-only
DESCRIPTION
"It is conformant to implement this object as read-only."
OBJECT xcmHrDevTrafficInputUnit
MIN-ACCESS read-only
DESCRIPTION
"It is conformant to implement this object as read-only."
OBJECT xcmHrDevTrafficOutputUnit
MIN-ACCESS read-only
DESCRIPTION
"It is conformant to implement this object as read-only."
OBJECT xcmHrDevTrafficInputMaxSize
MIN-ACCESS read-only
DESCRIPTION
"It is conformant to implement this object as read-only."
OBJECT xcmHrDevTrafficOutputMaxSize
MIN-ACCESS read-only
DESCRIPTION
"It is conformant to implement this object as read-only."
OBJECT xcmHrDevTrafficInputTimeout
MIN-ACCESS read-only
DESCRIPTION
"It is conformant to implement this object as read-only."
OBJECT xcmHrDevTrafficOutputTimeout
MIN-ACCESS read-only
DESCRIPTION
"It is conformant to implement this object as read-only."
OBJECT xcmHrSystemFaultRowStatus
SYNTAX INTEGER {active(1)} -- subset of RowStatus
MIN-ACCESS read-only
DESCRIPTION
"It is conformant to implement this object as read-only, and
only one of the enumerated values for the 'RowStatus' textual
convention need be supported, specifically: active(1)."
OBJECT xcmHrSystemFaultString
SYNTAX XcmFixedLocaleDisplayString (SIZE (0..1))
DESCRIPTION
"It is conformant to implement this object as read-only, and
only 1 octet maximum string length need be supported."
OBJECT xcmHrDevCalendarRowStatus
SYNTAX INTEGER {active(1)} -- subset of RowStatus
MIN-ACCESS read-only
DESCRIPTION
"It is conformant to implement this object as read-only, and
only one of the enumerated values for the 'RowStatus' textual
convention need be supported, specifically: active(1)."
OBJECT xcmHrDevCalendarExplicitDate
MIN-ACCESS read-only
DESCRIPTION
"It is conformant to implement this object as read-only."
OBJECT xcmHrDevCalendarCommandRequest
MIN-ACCESS read-only
DESCRIPTION
"It is conformant to implement this object as read-only."
OBJECT xcmHrDevCalendarCommandData
SYNTAX XcmHrDevMgmtCommandData (SIZE (0..1))
MIN-ACCESS read-only
DESCRIPTION
"It is conformant to implement this object as read-only, and
only 1 octet maximum string length need be supported.
Usage: Conformant implementations MUST encrypt passwords, keys,
and other security information stored in this string object."
OBJECT xcmHrSWRunRowStatus
SYNTAX INTEGER {active(1)} -- subset of RowStatus
MIN-ACCESS read-only
DESCRIPTION
"It is conformant to implement this object as read-only, and
only one of the enumerated values for the 'RowStatus' textual
convention need be supported, specifically: active(1)."
OBJECT xcmHrSWRunAdminName
SYNTAX XcmFixedLocaleDisplayString (SIZE (0..32))
MIN-ACCESS read-only
DESCRIPTION
"It is conformant to implement this object as read-only, and
only 32 octets maximum string length need be supported."
OBJECT xcmHrSWRunPhysicalDeviceIndex
MIN-ACCESS read-only
DESCRIPTION
"It is conformant to implement this object as read-only."
OBJECT xcmHrSWRunLogicalDeviceIndex
MIN-ACCESS read-only
DESCRIPTION
"It is conformant to implement this object as read-only."
OBJECT xcmHrSWRunNextIndex
MIN-ACCESS read-only
DESCRIPTION
"It is conformant to implement this object as read-only."
OBJECT xcmHrSWRunPreviousIndex
MIN-ACCESS read-only
DESCRIPTION
"It is conformant to implement this object as read-only."
OBJECT xcmHrSWInstalledRowStatus
SYNTAX INTEGER {active(1)} -- subset of RowStatus
MIN-ACCESS read-only
DESCRIPTION
"It is conformant to implement this object as read-only, and
only one of the enumerated values for the 'RowStatus' textual
convention need be supported, specifically: active(1)."
OBJECT xcmHrSWInstalledAdminName
SYNTAX XcmFixedLocaleDisplayString (SIZE (0..32))
MIN-ACCESS read-only
DESCRIPTION
"It is conformant to implement this object as read-only, and
only 32 octets maximum string length need be supported."
OBJECT xcmHrSWInstalledPhysicalIndex
MIN-ACCESS read-only
DESCRIPTION
"It is conformant to implement this object as read-only."
OBJECT xcmHrSWInstalledLogicalIndex
MIN-ACCESS read-only
DESCRIPTION
"It is conformant to implement this object as read-only."
OBJECT xcmHrSWInstalledNextIndex
MIN-ACCESS read-only
DESCRIPTION
"It is conformant to implement this object as read-only."
OBJECT xcmHrSWInstalledPreviousIndex
MIN-ACCESS read-only
DESCRIPTION
"It is conformant to implement this object as read-only."
OBJECT xcmHrDevDetailRowStatus
SYNTAX INTEGER {active(1)} -- subset of RowStatus
MIN-ACCESS read-only
DESCRIPTION
"It is conformant to implement this object as read-only, and
only one of the enumerated values for the 'RowStatus' textual
convention need be supported, specifically: active(1)."
OBJECT xcmHrDevDetailUnitClass
MIN-ACCESS read-only
DESCRIPTION
"It is conformant to implement this object as read-only."
OBJECT xcmHrDevDetailUnit
MIN-ACCESS read-only
DESCRIPTION
"It is conformant to implement this object as read-only."
OBJECT xcmHrDevDetailValueInteger
MIN-ACCESS read-only
DESCRIPTION
"It is conformant to implement this object as read-only."
OBJECT xcmHrDevDetailValueOID
MIN-ACCESS read-only
DESCRIPTION
"It is conformant to implement this object as read-only."
OBJECT xcmHrDevDetailValueString
SYNTAX OCTET STRING (SIZE (0..1))
MIN-ACCESS read-only
DESCRIPTION
"It is conformant to implement this object as read-only, and
only 1 octet maximum string length need be supported.
Usage: Conformant implementations MUST encrypt passwords, keys,
and other security information stored in this string object."
OBJECT xcmHrStorageRowStatus
SYNTAX INTEGER {active(1)} -- subset of RowStatus
MIN-ACCESS read-only
DESCRIPTION
"It is conformant to implement this object as read-only, and
only one of the enumerated values for the 'RowStatus' textual
convention need be supported, specifically: active(1)."
OBJECT xcmHrStorageRealization
MIN-ACCESS read-only
DESCRIPTION
"It is conformant to implement this object as read-only."
OBJECT xcmHrStorageProductDeviceIndex
MIN-ACCESS read-only
DESCRIPTION
"It is conformant to implement this object as read-only."
OBJECT xcmHrStoragePlatformDeviceIndex
MIN-ACCESS read-only
DESCRIPTION
"It is conformant to implement this object as read-only."
OBJECT xcmHrStorageMatchingDeviceIndex
MIN-ACCESS read-only
DESCRIPTION
"It is conformant to implement this object as read-only."
OBJECT xcmHrStorageSWRunIndex
MIN-ACCESS read-only
DESCRIPTION
"It is conformant to implement this object as read-only."
OBJECT xcmHrStorageSWInstalledIndex
MIN-ACCESS read-only
DESCRIPTION
"It is conformant to implement this object as read-only."
OBJECT xcmHrStorageNextIndex
MIN-ACCESS read-only
DESCRIPTION
"It is conformant to implement this object as read-only."
OBJECT xcmHrStoragePreviousIndex
MIN-ACCESS read-only
DESCRIPTION
"It is conformant to implement this object as read-only."
OBJECT xcmHrStoragePhysicalIndex
MIN-ACCESS read-only
DESCRIPTION
"It is conformant to implement this object as read-only."
OBJECT xcmHrStorageDetailRowStatus
SYNTAX INTEGER {active(1)} -- subset of RowStatus
MIN-ACCESS read-only
DESCRIPTION
"It is conformant to implement this object as read-only, and
only one of the enumerated values for the 'RowStatus' textual
convention need be supported, specifically: active(1)."
OBJECT xcmHrStorageDetailUnitClass
MIN-ACCESS read-only
DESCRIPTION
"It is conformant to implement this object as read-only."
OBJECT xcmHrStorageDetailUnit
MIN-ACCESS read-only
DESCRIPTION
"It is conformant to implement this object as read-only."
OBJECT xcmHrStorageDetailValueInteger
MIN-ACCESS read-only
DESCRIPTION
"It is conformant to implement this object as read-only."
OBJECT xcmHrStorageDetailValueOID
MIN-ACCESS read-only
DESCRIPTION
"It is conformant to implement this object as read-only."
OBJECT xcmHrStorageDetailValueString
SYNTAX OCTET STRING (SIZE (0..1))
MIN-ACCESS read-only
DESCRIPTION
"It is conformant to implement this object as read-only, and
only 1 octet maximum string length need be supported.
Usage: Conformant implementations MUST encrypt passwords, keys,
and other security information stored in this string object."
OBJECT xcmHrDevCoverRowStatus
SYNTAX INTEGER {active(1)} -- subset of RowStatus
MIN-ACCESS read-only
DESCRIPTION
"It is conformant to implement this object as read-only, and
only one of the enumerated values for the 'RowStatus' textual
convention need be supported, specifically: active(1)."
OBJECT xcmHrDevCoverName
SYNTAX XcmFixedLocaleDisplayString (SIZE (0..32))
MIN-ACCESS read-only
DESCRIPTION
"It is conformant to implement this object as read-only, and
only 32 octets maximum string length need be supported."
OBJECT xcmHrDevCoverDescription
SYNTAX XcmFixedLocaleDisplayString (SIZE (0..32))
MIN-ACCESS read-only
DESCRIPTION
"It is conformant to implement this object as read-only, and
only 32 octets maximum string length need be supported."
OBJECT xcmHrDevCoverTypeCover
MIN-ACCESS read-only
DESCRIPTION
"It is conformant to implement this object as read-only."
OBJECT xcmHrDevCoverStatusOpen
MIN-ACCESS read-only
DESCRIPTION
"It is conformant to implement this object as read-only."
OBJECT xcmHrDevAlertRowStatus
SYNTAX INTEGER {active(1)} -- subset of RowStatus
MIN-ACCESS read-only
DESCRIPTION
"It is conformant to implement this object as read-only, and
only one of the enumerated values for the 'RowStatus' textual
convention need be supported, specifically: active(1)."
OBJECT xcmHrDevAlertCodeString
SYNTAX XcmFixedLocaleDisplayString (SIZE (0..1))
DESCRIPTION
"It is conformant to implement this object as read-only, and
only 1 octet maximum string length need be supported."
OBJECT xcmHrDevAlertDescription
SYNTAX XcmFixedLocaleDisplayString (SIZE (0..32))
DESCRIPTION
"It is conformant to implement this object as read-only, and
only 32 octets maximum string length need be supported."
OBJECT xcmHrConsoleScreenName
SYNTAX XcmFixedLocaleDisplayString (SIZE (0..32))
DESCRIPTION
"It is conformant to implement this object as read-only, and
only 32 octets maximum string length need be supported."
OBJECT xcmHrConsoleScreenDescription
SYNTAX XcmFixedLocaleDisplayString (SIZE (0..32))
DESCRIPTION
"It is conformant to implement this object as read-only, and
only 32 octets maximum string length need be supported."
OBJECT xcmHrConsoleTabName
SYNTAX XcmFixedLocaleDisplayString (SIZE (0..32))
DESCRIPTION
"It is conformant to implement this object as read-only, and
only 32 octets maximum string length need be supported."
OBJECT xcmHrConsoleTabDescription
SYNTAX XcmFixedLocaleDisplayString (SIZE (0..32))
DESCRIPTION
"It is conformant to implement this object as read-only, and
only 32 octets maximum string length need be supported."
OBJECT xcmHrConsoleDefaultService
-- SYNTAX XcmHrConsoleDefaultService
MIN-ACCESS read-only
DESCRIPTION
"It is conformant to implement this object as read-only."
OBJECT xcmHrConsoleBrightness
-- SYNTAX Integer32
MIN-ACCESS read-only
DESCRIPTION
"It is conformant to implement this object as read-only."
OBJECT xcmHrConsoleContrast
-- SYNTAX Integer32
MIN-ACCESS read-only
DESCRIPTION
"It is conformant to implement this object as read-only."
OBJECT xcmHrConsoleAccessibility
-- SYNTAX TruthValue
MIN-ACCESS read-write
DESCRIPTION
"It is conformant to implement this object as read-only."
OBJECT xcmHrConsoleAutoClearTime
-- SYNTAX Integer32
MIN-ACCESS read-only
DESCRIPTION
"It is conformant to implement this object as read-only."
OBJECT xcmHrConsoleInsertTimeout
-- SYNTAX Integer32
MIN-ACCESS read-only
DESCRIPTION
"It is conformant to implement this object as read-only."
OBJECT xcmHrConsoleTray1Timeout
-- SYNTAX Integer32
MIN-ACCESS read-only
DESCRIPTION
"It is conformant to implement this object as read-only."
OBJECT xcmHrConsoleTray2nTimeout
-- SYNTAX Integer32
MIN-ACCESS read-only
DESCRIPTION
"It is conformant to implement this object as read-only."
OBJECT xcmHrConsoleLoadTimeout
-- SYNTAX Integer32
MIN-ACCESS read-only
DESCRIPTION
"It is conformant to implement this object as read-only."
OBJECT xcmHrConsoleSoundVolume
-- SYNTAX Integer32
MIN-ACCESS read-only
DESCRIPTION
"It is conformant to implement this object as read-only."
OBJECT xcmHrConsoleSoundDuration
-- SYNTAX Integer32
MIN-ACCESS read-only
DESCRIPTION
"It is conformant to implement this object as read-only."
|
|
