|
|
|
|
Description:
|
cpqSmCntlrSelfTestErrorCode OBJECT-TYPE
SYNTAX INTEGER (0..65535)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Server Manager Self Test Error Code.
The result of the self test run by the Server Manager board
firmware. This value is a set of bit flags defined as follows
(bit 0 is the least significant bit):
Bit 0 set - ROM Checksum failed
Bit 1 set - RAM test failed
Bit 2 set - 80186 timer failed
Bit 3 set - Built in modem failed
Bit 4 set - Direct connect interface failed
Bit 5 set - Real time clock failed
Bit 6 set - Temperature and/or voltage sensor failed
Bit 7 set - DTMF (tone detection circuitry) failed
Bit 8 set - VSL (voice synthesis logic circuitry) failed
Bit 9 set - Host bus monitor failed
Bit 10 set - Bus master interface failed
Bit 11 set - Battery is broken
Bits 12 - 15 are currently reserved.
A value of zero (no bits are set) indicates no self test error
has occurred."
|
|
Disclaimer: The owner of this site does not warrant or assume any liability or responsibility for the accuracy, completeness, or usefulness of any information available on this page (for more information, please read the complete disclaimer).
All rights reserved © 2007-2024 |
iso(1)
