|
|
Description:
|
xldv20Dsx1LoopbackConfig OBJECT-TYPE
SYNTAX INTEGER {dsx1NoLoop(1), dsx1PayloadLoop(2), dsx1LineLoop(3), dsx1OtherLoop(4)}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable represents the loopback configuration of the DS1 interface. Agents supporting read/write access should return badValue in response to a requested loopback state that the interface does not support. The values mean:.
dsx1NoLoop Not in the loopback state. A device that is not capable of performing a loopback on the interface shall always return this as it's value.
dsx1PayloadLoop The received signal at this interface is looped through the device. Typically the received signal is looped back for retransmission after it has passed through the device's framing function.
dsx1LineLoop The received signal at this interface does not go through the device (minimum penetration) but is looped back out.
dsx1OtherLoop Loopbacks that are not defined here."
|
|
|
|
