|
|
Description:
|
fibTmuPortsGenCloseRun OBJECT-TYPE
SYNTAX INTEGER {
open(1),
close(2)}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"When setting this object to the value of close (2)
the indicated port on Tau will be closed, the
related led will start blinking at a slow rate and
port will not be opened before it is set to the value
of open (1). Setting to the value of open (1)
does not guarantee the opening of the indicated
Tau port but will only allow the Tmu system to
let this port into the ring if it obeys the rules
of token ring. Reading this object returns the value
last set by the manager (or the default value). This
command holds only until the next system reset. To
make sure it remains valid after reset, use
'fibTmuPortsGenClosePerm'.
This command only affects ports on Tau. If there is
no Tau attached when command is issued, then it is
stored in memory and goes into effect when a Tau
is attached. This command will have no effect of
a station directly attached to the Tmu. To detach
a directly attached station, use
'fibTmuPortsManagerCloseRun' (See above)."
|
|
|
|
