|
|
Description:
|
fibTmuMatchStationInfo OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Information on the attached station:
If BIT0 is set (value = 0x01) then this is definitely
a 'sniffer' port (i.e. a station which is sending
'trace tool present' messages is located on this port).
If BIT1 is set (value = 0x02) then its location
is doubtful (System has been unable to resolve
the location of this station).
If BIT2 is set (value = 0x04) then station is not
attached to one of the tmu's ports but rather to
the trunk.
If bit3 is set (value = 0x08) then station is one of
the tmu's chips.
If BIT4 is set (value = 0x10) then this is a station
attached to the tmu (and not on the trunk).
See remark in fibTmuMatchListValid above"
|
|
|
|
