|
|
Description:
|
hwPortOperStatus OBJECT-TYPE
SYNTAX INTEGER {normal(1), fault(2), localLoopback(3), forbidden(4), test(5), remoteLoopback(6), activated(10), deactivated(11), block(12), nolight(13), innerLocalLoopback(14), innerRemoteLoopback(15), locked(16), busy(17), maintain(18), standbynormal(19), standbyfault(20), adslloopbackafe(21), adslloopbackhybrid(22), rtuLocalLoopback(23), rtuRemoteLoopback(24), linkup(25), linkdown(26), powerDenied(50)}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Port operation status.
Options:
1.normal(1) -indicates that the link is up or activated
2.fault(2) -indicates that port failure
3.localLoopback(3) -indicates that normal local loopback
4.forbidden(4) -indicates that the port is disabled
5.test(5) -indicates test start
6.remoteLoopback(6) -indicates normal remote loopback
7.activated(10) -indicates that the port is being activated
8.deactivated(11) -indicates that the link is down or deactivated
9.block(12) -indicates port blocking
10.nolight(13) -indicates no signal in ATM port
11.innerLocalLoopback(14) -indicates that inner local loopback toward inner system chipset (it's UTOPIA loopback for ADSL port)
12.innerRemoteLoopback(15)-indicates that inner remote loopback toward inner system chipset
13.locked(16) -indicates locked
14.busy(17) -indicates busy
15.maintain(18) -indicates maintenance
16.standbynormal(19) -indicates that the port on the standby control board is activated
17.standbyfault(20) -indicates that the port on the standby control board is faulty
18.adslloopbackafe(21) -indicates that AFE loopback
19.adslloopbackhybrid(22) -indicates that HYBRID loopback
20.rtuLocalLoopback(23) -indicates that RTU local loopback
21.rtuRemoteLoopback(24) -indicates that RTU remote loopback
22.linkup(25) -indicates eth port online
23.linkdown(26) -indicates eth port offline
24.powerDenied(50) -indicates port operation state is power denied"
|
|
|
|
iso(1)
