|
|
Description:
|
hwVOPRFIConfProfRfiBands OBJECT-TYPE
SYNTAX Xdsl2RfiBands
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"For ADSL2plus operation mode, this configuration parameter defines the subset of downstream PSD mask
breakpoints, as specified in hwVOPModeSpecificPSDConfProfPsdMaskDs (PSDMASKds), that shall be
used to notch an RFI band. This subset consists of pairs of consecutive subcarrier indices
belonging to breakpoints: [ti; ti + 1], corresponding to the low level of the notch.
The specific interpolation around these points is defined in ITU-T Rec. G.992.5.
For VDSL2 operation mode, this configuration parameter defines the bands where the PSD shall be reduced
as specified in ITU-T Rec. G.993.2 #7.2.1.2. Each band shall be represented by a start and stop subcarrier
indices with a subcarrier spacing of 4.3125 kHz.
Up to 16 bands may be specified.
This parameter defines the RFI bands for both upstream and downstream directions."
REFERENCE
"ITU-T G.997.1, paragraph #7.3.1.2.10 (RFIBANDS)"
|
|
Disclaimer: The owner of this site does not warrant or assume any liability or responsibility for the accuracy, completeness, or usefulness of any information available on this page (for more information, please read the complete disclaimer).
All rights reserved © 2007-2024 |