|
|
|
|
Description:
|
vdsl2DpboProfEsel OBJECT-TYPE
SYNTAX Unsigned32 (0..511)
UNITS "0.5dB"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This configuration parameter defines the assumed electrical length of
cables (E-side cables) connecting exchange based DSL services to a remote
flexibility point (cabinet), that hosts the xTU-C that is subject to
spectrally shaped downstream power back-off depending on this length.
For this parameter the electrical length is defined as the loss (in dB)
of an equivalent length of hypothetical cable at a reference frequency
defined by the network operator or in spectrum management regulations.
DPBOESEL shall be coded as an unsigned integer representing an electrical
length from 0 dB (coded as 0) to 255.5 dB (coded as 511) in steps of 0.5 dB.
All values in the range are valid.If DPBOESEL is set to zero, the DPBO in
this section shall be disabled.
Unit: 0.5dB"
REFERENCE
"ITU-T G.997.1(200604), paragraph 7.3.1.2.13"
DEFVAL {0}
|
|
Disclaimer: The owner of this site does not warrant or assume any liability or responsibility for the accuracy, completeness, or usefulness of any information available on this page (for more information, please read the complete disclaimer).
All rights reserved © 2007-2025 |
