|
|
Description:
|
ibm8272TsFilterPorts OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The set of ports to which this filter is applied.
Each octet within the value of this object specifies
a set of eight ports, with the first octet specifying
ports 1 through 8, the second octet specifying ports 9
through 16, etc. Within each octet, the most
significant bit represents the lowest numbered
port, and the least significant bit represents the
highest numbered port. Thus, each port of the
TokenRing Switch is represented by a single bit within the
value of this object. If that bit has a value of
'1' then that port is included in the set of
ports; the port is not included if its bit has a
value of '0'.
All frames with destination address equal to the
station address corresponding to this entry and
entering from any of the specified ports will be
dropped.
Setting this object with a MIB instance corresponding
to the dotted decimal MAC address and a filter type,
with the set value equal to the mask of ports you
want to filter will create an entry in the table.
Ex. MIB instance: 16.0.90.3.0.36.1
SNMP set value: 7F 00 00 00
This would create a filter entry with the following
characteristics:
MAC Address: 10 00 5A 03 00 26 (non-canonical format)
Filter Type: source-filter
Filter Ports: 2 3 4 5 6 7 8"
|
|
|
|
