|
|
Description:
|
hubGrpStatsMon100TotalOctets OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total number of octets contained in the valid
frames that have been received on all of the 100Mbps
ports in this group. If an implementation can not
obtain a count of octets as seen by the repeater itself,
this counter may be the summation of the
values of the rptrMonitorPortReadableOctets
counters for all of the 100Mbps ports in the group.
This statistic provides an indicator of the total
data transferred. The approximate minimum time
for rollover of this counter in a 100Mb/s repeater
is 5.8 minutes divided by the number of 100Mbps ports in
the group.
For 100Mb/s repeaters processing traffic at a
maximum rate, this counter can roll over in less
than 6 minutes divided by the number of ports in
the repeater. Since that amount of time could
be less than a management station's poll cycle
time, in order to avoid a loss of information a
management station is advised to also poll the
hubGrpStatsMon100Upper32TotalOctets object."
|
|
|
|
|
|
