|
|
Description:
|
brcdMctClusterDeployFailureReason OBJECT-TYPE
SYNTAX INTEGER {none(1), unknown(2), rBridgeIdNotConfigured(3), sessionVlanNotConfigured(4), iclNotConfigured(5), peerNotConfigured(6), iclIsMrpSecondaryInterface(7), iclIsErpRplInterface(8), iclIsErpMsInterface(9), iclIsErpFsInterface(10), iclNotInSessionVlan(11), iclNotInMemberVlans(12), nonIclInterfacesInSessionVlan(13), mgmtVeNotConfiguredInSessionVlan(14), mgmtIpNotConfiguredInSessionVlan(15), mgmtIpIsUsedInPeerOrClientConfig(16), mgmtIpNotInSubnetOfPeerIp(17), rBridgeIdIsUsedInPeerOrClientConfig(18), clientInterfaceIsNotInMemberVlan(19), defaultVlanConfigForSessionOrMemberVlan(20)}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The last failure reason for cluster deploy operation through SNMP.
The following failure reason codes are supported:
none(1) - The last deploy is successful.
unknown(2) - The last deploy has failed
for unknown reason.
rBridgeIdNotConfigured(3) - Remote bridge id is not
configured.
sessionVlanNotConfigured(4) - Session VLAN is not
configured.
iclNotConfigured(5) - ICL is not configured.
peerNotConfigured(6) - Peer is not configured.
iclIsMrpSecondaryInterface(7) - In NI CES/CER devices, ICL
should not be MRP
secondary interface.
iclIsErpRplInterface(8) - In NI CES/CER devices, ICL
should not be ERP RPL
interface.
iclIsErpMsInterface(9) - In NI CES/CER devices, ICL
should not be ERP MS
interface.
iclIsErpFsInterface(10) - In NI CES/CER devices, ICL
should not be ERP FS
interface.
iclNotInSessionVlan(11) - ICL is not in session VLAN.
iclNotInMemberVlans(12) - ICL is not in member VLANs.
nonIclInterfacesInSessionVlan(13) - Non ICL interfaces are
present under session VLAN.
mgmtVeNotConfiguredInSessionVlan(14) - Management VE is not
configured in session VLAN.
mgmtIpNotConfiguredInSessionVlan(15) - Management IP is not
configured in session VLAN.
mgmtIpIsUsedInPeerOrClientConfig(16) - Management IP is used in peer
or client configuration.
mgmtIpNotInSubnetOfPeerIp(17) - Management IP is not in subnet
of peer IP.
rBridgeIdUsedInPeerOrClientConfig(18) - Remote bridge id is used
in peer or client
configuration.
clientInterfaceIsNotInMemberVlan(19) - Client interface is not in
member VLAN.
defaultVlanConfigAsSessOrMemberVlan(20) - Default VLAN is configured
as session or member VLAN."
|
|
