|
|
Description:
|
apathUserApathOperation OBJECT-TYPE
SYNTAX INTEGER {
mainPrefered (1),
switchToBestPath (2),
avoidSwitching (3)}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"default = mainPrefered
This defines the switching characteristics of main and alternate paths.
MAIN PREFERED
Re-connect to the main path only.
- continuous retry of main path.
- disconnect the alternate path in use and switch to the main path
when it is known to be UP.
- When the main path fails, then attempt to re-establish the path on
one of the alternate paths in the order Alternate 1, then Alternate
2, then Alternate 3.
SWITCH TO BEST PATH
Connect to the best path.
- continuous retry of the main path and any path that is higher
than the path currently in use.
- disconnect the path ans select the highest priority path that is
known to be UP.
- when a the current path fails, then attempt to re-establish the
path based on the priority order of: main, alternate 1, 2, 3.
AVOID SWITCHING
No automatic switching occurs.
- remain connected with the current path as long as it remains UP.
- when it fails, or is commanded to disconnect, then re-establish
path based on the priority order of: main, alternate 1, 2, 3."
DEFVAL {mainPrefered}
|
|
|
|
|
|
