|
|
|
|
Description:
|
swL2IGMPPortMap OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"This object indicates which ports belong to the same
multicast group, on a per-VLAN basis. Each multicast group has an
octet string which is indicated by a port map. The most significant
bit represents the lowest numbered port, and the least significant bit
represents the highest numbered port. Thus, each port of the switch is
represented by a single bit within the value of this object. If that bit
has a value of '1' then that port is included in the set of ports; the
port is not included if its bit has a value of '0'(Note that the setting
of the bits corresponding to the port from which a frame is received is
irrelevant). The 4 octets represent one unit port according to its logical
port. If the unit is less than 32 ports, other ports are not affected and
are replaced with zeroes."
|
|
Disclaimer: The owner of this site does not warrant or assume any liability or responsibility for the accuracy, completeness, or usefulness of any information available on this page (for more information, please read the complete disclaimer).
All rights reserved © 2007-2025 |
