|
|
|
|
Description:
|
swL2PVIDAutoAssignmentState OBJECT-TYPE
SYNTAX INTEGER {enabled(1), disabled(2)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object controls the PVID auto assignment state.
If 'Auto-assign PVID' is disabled, the PVID can only be changed
by PVID configuration (user changes explicitly). The VLAN
configuration will not automatically change the PVID.
If 'Auto-assign PVID' is enabled, the PVID will be changed by PVID or VLAN configuration. When a user configures
a port to VLAN X's untagged membership, this port's PVID
will be updated with VLAN X. Using the VLAN list command,
PVID is updated as the last item of the VLAN list. When a user removes
a port from the untagged membership of the PVID's VLAN, the
port's PVID will be assigned 'default VLAN'."
|
|
Disclaimer: The owner of this site does not warrant or assume any liability or responsibility for the accuracy, completeness, or usefulness of any information available on this page (for more information, please read the complete disclaimer).
All rights reserved © 2007-2025 |
iso(1)
