|
|
Description:
|
swDevInfoFrontPanelLedStatus OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..127))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object is a set of system LED indications.
The first six octets are defined as system LED. The first two
octets are currently unused and must be set to zero. The third
octet indicates the power LED. The fourth octet indicates the
console LED. The fifth LED is RPS (Redundancy Power Supply) LED.
The sixth LED is Master(Stacking Master Device) LED.
For the byte range form 7 to 8, it reflect the MGMT port.
Every two bytes are presented to a port.
For the byte range from 9 to 56, it reflect the 1~24FE ports.
Every two bytes are presented to a port.
For the byte range from 57 to 64, it reflect the 25~26GE Combol ports.
Every four bytes are presented to a port. The byte range from 57
to 60, it reflect copper ports. The byte range from 61 to 64, it
reflect fiber ports.
For the byte range from 65 to 72, it reflect the 27~28GE Combol ports.
Every four bytes are presented to a port. The byte range from 65
to 68, it reflect copper ports. The byte range from 69 to 72, it
reflect fiber ports.
Every two bytes are presented to a port. The first byte is presented
as the Link/Activity LED. The second byte is presented as the Speed LED.
Power LED:
01 = fail/error/non existence
02 = work normal
Console LED:
01 = Console LED OFF
02 = Console LED ON
RPS LED:
01 = RPS LED OFF
02 = RPS LED ON
Master LED:
01 = Master LED OFF
02 = Master LED ON
Link/Activity LED :
The most significant bit is used for blink/solid:
8 = The LED blinks.
The second most significant bit is used for link status:
1 = link fail.
2 = link pass.
Speed LED :
01 = 10Mbps.
02 = 100Mbps.
03 = 1000Mbps.
The remaining bytes are currently unused and must be 0."
|
|
