|
|
|
|
Description:
|
swDevInfoFrontPanelLedStatus OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object is a set of system LED indications. The first two
octets indicate the LED PoE mode.
01 02 = PoE Mode
02 01 = Normal Mode
00 00 = Non-PoE Device
The next two are defined as system LED.
The third octet is power LED.
0x01 : Power Off
0x02 : Power On
the forth octet is console led:
0x01 = system start up
0x02 = a user is login through console
0x03 = no user is login through console
The fifth octect is RPS (Redundancy Power Supply) LED.
0x01 = Ineternal Power working
0x02 = External Power working
The sixth octect is FAN LED
0x01 = Fan LED Off
0x02 = Fan LED blinking
The other octets following are the logical port LED
(following dot1dBasePort ordering). Every two bytes are presented to a port.
The first byte is presentd to the Link/Activity LED. The second byte is
presented to the Speed LED.
Link/Activity LED:
The most significant bit is used for blink/solid:
8 = The LED blinks.
The second significant bit is used for link status:
1 = link fail.
2 = link pass.
Speed LED:
Normal Mode
bit 4 :
0 = copper link up (if link fail will show 0)
1 = fibber link up
bit 2-0 :
01 = 10Mbps.
02 = 100Mbps.
03 = 1000Mbps.
04 = 10000Mbps
POE mode:
01 = no PD connected.
02 = no deliver power to PD.
03 = deliver power to PD."
|
|
Disclaimer: The owner of this site does not warrant or assume any liability or responsibility for the accuracy, completeness, or usefulness of any information available on this page (for more information, please read the complete disclaimer).
All rights reserved © 2007-2024 |
