|
|
Description:
|
activeAlarmSeverity OBJECT-TYPE
SYNTAX AlarmSeverity
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the severity of the raised alarm.
Notes:
1. The severity of the alarm in the Active Alarm table may be different from the
severity configured in AlarmEventConfigTable due to severity escalation or deescalation
which may be performed by the NE as a consequent of internal events.
2. A trap will be sent when the alarm is raised or cleared (if not masked).
This MIB object will be attached to the trap.
For alarms that are cleared, the value will be cleared (1).
After the trap is sent with a cleared (1) value, the device will immediately remove
the alarm and the cleared alarm from this table."
|
|
|
|
|
|
