Description:
|
modemConfUpLinkMir OBJECT-TYPE
SYNTAX Integer32
UNITS "Kilobits/sec"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to configure Uplink Maximum Information Rate.
This object is for configuring the Data Rate in Kbps, instead of enumerations,
as in 'modemConfUpLinkDataRate'. If this object is configured to a Data Rate, which
is not supported by the Modem, it will be internally converted to the nearest higher
value supported by the Modem. Modem supports only the following Data Rates:
64Kbps, 128Kbps, 256Kbps, 512Kbps, 1Mbps, 4Mbps, 10Mbps and 85Mbps(Full Speed)."
|
|