|
|
Description:
|
cienaCesOamAdminState OBJECT-TYPE
SYNTAX INTEGER {disabled(1), enabled(2)}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object is used to provision the default administrative OAM mode for this
interface. This object represents the desired state of OAM for this interface.
The cienaCesOamAdminState always starts in the disabled(1) state
until an explicit management action or configuration
information retained by the system causes a transition to the
enabled(2) state.
Note that the value of this object is ignored when the
interface is not operating in full-duplex mode. OAM is not
supported on half-duplex links."
|
|
|
|
