|
|
Description:
|
coDot11ScanPeriodicity OBJECT-TYPE
SYNTAX Integer32 (10..3600)
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Specifies the time between periodic scans. Each time a scan
operation is performed, only one frequency is scanned. A fair
amount of periodic scans are needed in order complete a full
scan of all the supported frequencies. This parameter only
applies when coDot11ScanEnabled is set to 'enable'.
Not supported on the WCB-200."
DEFVAL { 600 }
|
|
Disclaimer: The owner of this site does not warrant or assume any liability or responsibility for the accuracy, completeness, or usefulness of any information available on this page (for more information, please read the complete disclaimer).
All rights reserved © 2007-2024 |