|
|
Description:
|
dcmErrCode OBJECT-TYPE
SYNTAX INTEGER {other(1), noError(2), notValidAtThisTime(3), validationFailed(4), optionNotSupported(5), outOfRange(6), invalidOption(7), notAllowedPrimeRec(8), lockedOut(9), exceededMaxLength(10), exceededMaxNumberOfAllowedOccurrences(11), exceededMaxNumberOfRows(12), readOnly(13)}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the type of error that was detected for the object referenced by
dcmErrCodeOID. The values are:
1=other
2=noError, the operation resulted in no error for the specified object.
3=notValidAtThisTime, try to set a variable to a value that under othercircumstances could be valid, but is not valid at this time (e.g. try to setRowStatus to createAndWait when it is currently set to active).
4=validationFailed, validation of a study failed.
5=optionNotSupported, (e.g. try to set an enumeration value that is notsupported by the device).
6=out of range, try to set an object to a value that is out of range.
7=invalidOption (e.g. try to do axle class using standard loop loop sensorarray).
8=NotAllowedPrimeRec, can't modify this object while primed or recording9=lockedOut, objects are currently locked (e.g. object is being modified byanother application).
10=exceededMaxLength, try to set an octet string to a length greater than issupported.
11=exceededMaxNumberOfAllowedOccurrences for this index (e.g. try to set morethan the allowed number of cal factors for an IO).
12=exceededMaxNumberOfRows, allowed for this table.
13=readOnly, (e.g. try to set dataStorageMediaAvailable, this object value is
read-only)."
|
|
|
|
|
|
