|
|
Description:
|
rmcBlockData OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(2..484))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"<Definition> An OER encoded string used for
uploading and downloading RMC parameters. See
SECTION 4 for encoding and decoding the block.
A SET on this object shall require the use of
'dbCreateTransaction' defined in NTCIP 1201 v03
Clause 2.3.1.
A SET of this object shall be evaluated for validity
and an Error Status of badValue(3) be returned for the
following conditions:
1) rmcBlockDataType is not supported
2) rmcBlockDataID is not supported
3) rmcBlockIndex1 is zero or is greater than the table's maximum
number of rows
4) rmcBlockQuantity1 is zero or
rmcBlockIndex1 + rmcBlockQuantity1 - 1 is greater than the table's
maximum number of rows
5) rmcBlockIndex2 is zero or is greater than the table's maximum
number of rows
6) rmcBlockQuantity2 is zero or
rmcBlockIndex2 + rmcBlockQuantity2 - 1 is greater than the table's
maximum number of rows
7) rmcBlockIndex3 is zero or is greater than the table's maximum
number of rows
8) rmcBlockQuantity3 is zero or
rmcBlockIndex3 + rmcBlockQuantity3 - 1 is greater than the table's
maximum number of rows
9) rmcBlockIndex4 is zero or is greater than the table's maximum
number of rows
10) rmcBlockQuantity4 is zero or
rmcBlockIndex4 + rmcBlockQuantity4 - 1 is greater than the table's
maximum number of rows
11) rmcBlockIndex5 is zero or is greater than the table's maximum
number of rows
12) rmcBlockQuantity5 is zero or
rmcBlockIndex5 + rmcBlockQuantity5 - 1 is greater than the table's
maximum number of rows
13) if the SET length is zero or incorrect for
rmcBlockDataType & rmcBlockDataID
14) if the SET (SEQUENCE OF) value is incorrect.
When this validity check fails, rmcBlockErrorStatus
shall be set equal to the Bullet Value above that
generated the error. Because of SNMP, it cannot be
determined in advance which error of multiple,
simultaneous errors will be reported.
A SET that includes an unsupported value for a
supported data element shall return an Error Status
of badValue(3) and rmcBlockErrorStatus shall be set
equal to:
(data Sequence # * 100) + data Element #
A SET that includes a non-zero or non-null value in
the position of an unsupported data element shall
return an Error Status of badValue(3) and
rmcBlockErrorStatus shall be set equal to:
(data Sequence # * 100) + data Element #
A GET on this object shall utilize values currently in
rmcBlockGetControl to define the data to be returned.
When rmcBlockGetControl has invalid data, an Error
Status of badValue(3) shall be returned.
A GET shall return a zero or null value in the position
of an unsupported object.
<Object Identifier> 1.3.6.1.4.1.1206.4.2.2.7.2"
|
|
|
|
|
|
