|
|
Description:
|
rmcBlockGetControl OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(2..12))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"<Definition> An OER encoded string of reference
parameters for RMC Block Uploads. The parameter
values in this string are:
rmcBlockDataType INTEGER (0..255)
rmcBlockDataID INTEGER (0..255)
rmcBlockIndex1 INTEGER (1..255) if needed
rmcBlockQuantity1 INTEGER (1..255) if needed
rmcBlockIndex2 INTEGER (1..255) if needed
rmcBlockQuantity2 INTEGER (1..255) if needed
rmcBlockIndex3 INTEGER (1..255) if needed
rmcBlockQuantity3 INTEGER (1..255) if needed
rmcBlockIndex4 INTEGER (1..255) if needed
rmcBlockQuantity4 INTEGER (1..255) if needed
rmcBlockIndex5 INTEGER (1..255) if needed
rmcBlockQuantity5 INTEGER (1..255) if needed
A GET of rmcBlockData shall utilize values currently
in this object to define the data to be returned.
A SET of this object shall be evaluated for validity
and an Error Status of badValue(3) be returned for the
following conditions:
1) rmcBlockDataType is not supported
2) rmcBlockDataID is not supported
3) rmcBlockIndex1 is zero or is greater than the table's
maximum number of rows
4) rmcBlockQuantity1 is zero or
rmcBlockIndex1 + rmcBlockQuantity1 - 1 is greater
than the table's maximum number of rows
5) rmcBlockIndex2 is zero or not supported
6) rmcBlockQuantity2 is zero or
rmcBlockIndex2 + rmcBlockQuantity2 - 1 is greater
than the table's maximum number of rows
7) rmcBlockIndex3 is zero or is greater than the table's
maximum number of rows
8) rmcBlockQuantity3 is zero or
rmcBlockIndex3 + rmcBlockQuantity3 - 1 is greater
than the table's maximum number of rows
9) rmcBlockIndex4 is zero or is greater than the table's
maximum number of rows
10) rmcBlockQuantity4 is zero or
rmcBlockIndex4 + rmcBlockQuantity4 - 1 is greater
than the table's maximum number of rows
11) rmcBlockIndex5 is zero or is greater than the table's
maximum number of rows
12) rmcBlockQuantity5 is zero or
rmcBlockIndex5 + rmcBlockQuantity5 - 1 is greater
than the table's maximum number of rows
13) if the SET length is zero or incorrect for
rmcBlockDataType & rmcBlockDataID
14) if the GetResponse length for a GET on
rmcBlockData using maximum data field sizes
would exceed a local limitation
When this validity check fails, rmcBlockErrorStatus
shall be set equal to the Bullet Value above that
generated the error. Because of SNMP, it cannot be
determined in advance which error of multiple,
simultaneous errors will be reported.
<Object Identifier> 1.3.6.1.4.1.1206.4.2.2.7.1"
|
|
|
|
|
|
