|
|
Description:
|
rmcTBActionCtrl OBJECT-TYPE
SYNTAX INTEGER {dark(1), restInGreen(2), fixedRate(3), trafficResponsive(4), emergencyGreen(5), skip(6)}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Indicates the action that may be active if the metered lane is controlled by
timebase control. This object is used to control the entry, while the
rmcTBActionStatus-object indicates the status. The values are:
dark - indicates that the metered lane will advance to the Pre-Metering
Non-Green interval.
restInGreen - indicates that the metered lane will advance to the
Pre-Metering Green interval.
fixedRate - indicates that the metered lane will operate using the value of
the rmcTBRateCtrl-object.
trafficResponsive -indicates that the metered lane will operate using
mainline station traffic conditions and the value of the
rmcTBPlanCtrl-object.
emergencyGreen - indicates that the metered lane will advance to the
Post-metering Green interval without entering the Shutdown Green,
Shutdown Yellow, Shutdown Red or Shutdown Warning intervals when the
metered lane is NOT in the Non-metering state. The metered lane will
advance to the Pre-Metering Green interval when the metered lane is
in the Non-metering state.
skip - indicates that the next-lower level command source shall be
considered as specified by the rmcCmdSourcePriorityOrder-object.
<Object Identifier> 1.3.6.1.4.1.1206.4.2.2.5.6.1.3"
REFERENCE
"See Clause A.3.1"
|
|
|
|
|
|
