|
|
Description:
|
rmcHistQueueStatus OBJECT-TYPE
SYNTAX INTEGER(0..65535) -- BITMAP16
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the cumulative status of the queue detector. The values are:
<Format>
Bit Number Name Description
Bit 15: reserved.
Bit 14: reserved.
Bit 13: reserved.
Bit 12: reserved.
Bit 11: reserved.
Bit 10: reserved.
Bit 09: reserved.
Bit 08: Dependent Max Presence - the rmcQueueStatus-object has or had
a value of 'depNoActivity' since reset.
Bit 07: Dependent No Activity - the rmcQueueStatus-object has or had
a value of 'depNoActivity' since reset.
Bit 06: Error At Sensor - the rmcQueueStatus-object has or had
a value of 'Disabled' since reset.
Bit 05: No Activity - the rmcQueueStatus-object has or had
a value of 'noActivity' since reset.
Bit 04: Max Presence - the rmcQueueStatus-object has or had
a value of 'maxPresence' since reset.
Bit 03: Erratic Count - the rmcQueueStatus-object has or had
a value of 'erraticCount' since reset.
Bit 02: Other Error - the rmcQueueStatus-object has or had
a value of 'otherError' since reset.
Bit 01: Working - the rmcQueueStatus-object has or had
a value of 'Working' since reset.
Bit 00: Disabled - the rmcQueueStatus-object has or had
a value of 'Disabled' since reset.
In the context of this object, 'reset' means either an initialization of the
RMC or a successful SET of the rmcHistDetectorReset-object. When a 'reset'
occurs, all bits shall be set to 0.
All reserved bits shall always be set to zero (0). A bad value error shall
be returned, if a management application writes a one (1) to any of the
reserved bits.
<Object Identifier> 1.3.6.1.4.1.1206.4.2.2.3.3.3.10.1.3"
REFERENCE
"See Clause A.2.2.3"
|
|
|
|
|
|
