|
|
Description:
|
rmcAverageSpeed OBJECT-TYPE
SYNTAX INTEGER(0..255)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the speed measured over the rmcAveragingPeriods-object number of
preceding calculation intervals. The speed shall be determined by calculating
the average of all mainline lanes using (A or B) and C:
A) those mainline lanes whose rmcMLStatus-object value is NOT 'total failure'
or 'disabled' at any time during the previous averaging periods number
of calculation intervals,
OR
B) those mainline lanes whose rmcMLStatus-object value is 'partial failure'
and whose rmcVehicleLength is NOT '',
AND
C) whose rmcMLUsageStatus-object as a value of 'schemeS', 'schemeFS',
'schemeOS', or 'schemeFOS'.
Any mainline lane whose rmcMLStatus-object had:
- a value of 'totalFailure' during the Averaging Periods,
OR
- a value of 'partialFailure' during the Averaging Periods and whose
rmcMLMode-object has a value of 'singleEnabledLead' or is disabled),
shall not be used for the calculation.
The value of this object shall be calculated using a vehicle average.
The value shall be expressed in 1-km/h increments.
<Unit> kilometers per hour
<Object Identifier> 1.3.6.1.4.1.1206.4.2.2.2.7"
REFERENCE
"See Clause A.4"
|
|
|
|
|
|
