|
|
Description:
|
rmcAverageFlowRate OBJECT-TYPE
SYNTAX INTEGER(0..65535)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the flow rate measured over the rmcAveragingPeriods-object number
of preceding calculation intervals. The flow rate shall be determined by
calculating the average of all mainline lanes whose rmcMLStatus-object value
is NOT 'total failure' or 'disabled' at any time during the previous averaging
periods number of calculation intervals, AND whose rmcMLUsageStatus-
object has a value of 'schemeF', 'schemeFO', 'schemeFS', or 'schemeFOS'. Any
mainline lane whose rmcMLStatus-object had a value of 'totalFailure' during
the Averaging Periods shall not be used for the calculation.
The value of this object shall be calculated using a lane average.
The value shall be expressed in vph in 1-vph increments.
<Unit> vehicles per hour
<Object Identifier> 1.3.6.1.4.1.1206.4.2.2.2.5"
REFERENCE
"See Clause A.4"
|
|
|
|
|
|
