|
|
Description:
|
spatStatus OBJECT-TYPE
DESCRIPTION
"<Definition> For NTCIP 1202 user clarification, if a mode is enabled or active, the associated bit shall be set to (1). The definition of the term 'recent' is defined by the system in use. Bit 0 is equal to Bit 0 of the BIT STRING of DE_IntersectionStatusObject, Bit 1 is equal to Bit 1, etc.
Bit 0: Enabled when unitControlStatus is remoteManualControl (9)
Bit 1: Enabled when Bit 4: Stop Time in unitAlarmStatus2 is TRUE
Bit 2: Enabled when unitFlashStatus is other (1), faultMonitor (5) or mmu (6)
Bit 3: Enabled when the preemptState for any preempt is any value other than other (1), notActive (2), or notActiveWithCall (3).
Bit 4: Enabled if the CU is servicing a signal priority request.
Bit 5: Enabled if the CU is operating in fixedTime mode. This bit and bit 6 are mutually exclusive.
Bit 6: Enabled if the CU is operating in an actuated mode. This bit and bit 5 are mutually exclusive.
Bit 7: Enabled if the unitFlashStatus is automatic (3), localManual (4) or in startup (7)
Bit 8: Controller failure or failure in operation.
Bit 9: Reserved
Bit 10: Enabled if a spatMapActivationCode value has changed within the previous two coordination cycles.
Bit 11: Enabled if the current cycle is the first cycle that a new set of enabledLanesBits is used.
Bit 12: Enabled if the mapActivatePlanError is any value other than none (2).
Bit 13: Enabled if any spatPortStatus object is any value other than normal (3).
<Object Identifier> 1.3.6.1.4.1.1206.4.2.17.1.1"
REFERENCE
"SAE J2735_201603 DE_IntersectionStatusObject"
|
|
|
|
|
|
