|
|
Description:
|
recConfigCompareValue2 OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"<Definition>If the recConfigMode is set to
hysteresisBound, this object specifies the second comparison
value for the hysteresis. If the recConfigMode is set to
greaterThanValue, smallerThanValue, or andedWithValue, this
object specifies the time (in tenth of seconds, +1 tenth / -0
tenths) for which the samples used for comparison are
true prior to the triggering condition becoming true. If the
recConfigMode is set to onChange or periodic, the value of
this object shall be ignored.
The amount of time the condition istrue is measured in
tenths of a second. The accuracy of this timer is limited to
+1 tenth of a second and -0 tenths of a second. If the trigger
is true for at least the time shown in this parameter +1
tenth of a second, the condition shall trigger a recording.
It is recognized that some designs only sample the condition
periodically, in which case the condition is deemed true for
at least the time indicated by this object before the trigger
becomes true and the trigger shall always become true if the
condition is true for a duration equal to the value shown in
this object plus 1 tenth of a second.
<Object Identifier> 1.3.6.1.4.1.1206.4.1.1.7.9.7.1.5"
DEFVAL {0}
|
|
|
|
|
|
