|
|
Description:
|
ipeFsUpdateFileConfigPartial OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(4..4))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specify Equipment Configuration Partial Download pattern.
If this object is set with ipeFsUpdateFileDetail, the system will
perform the partial download, otherwise the system will perform
the normal download. And Partial Download is performed only when
Equipment Configuration Dowload.
SYNTAX is 32bit string. The definition of each bit is shown
below.
- bit1-4: specify download mode.
0001 : normal mode
other value : reserved (system rejects the request)
- bit5-32: specify the equipment config part. Setting 1 to each
bit means corresponding config download is activated.
Bit5 : Equipment Configuration (must set when the normal mode)
Bit6 : Radio Configuration
Bit7 : Radio Configuration w/o Radio Frequency
Bit6 and Bit7 cannot be set to 1 simultaneously.
Bit8 : E1/STM1 Mapping (must set when Bit6 or Bit7 is activated)
Bit9 : MODEM Function setting
Bit10: ETH Function setting
Bit11: E1/STM1/Cross Connect Setting
Bit12: PWE Setting
Bit13: Equipment Clock/Synchronization Setting
Bit14: Relay-Alarm Mapping
Bit15: V11/OW Setting
Bit16: Alarm/AIS Setting
Bit17: PMON/RMON Setting
Bit18: AUX Setting
other: reserved (don't care)
Example)
the pattern of downloading the equipment configuration, radio
configuration, E1/STM1 mapping, ETH Function Setting on normal
mode.
ipeFsUpdateFileConfigPartial =
'00011101010000000000000000000000'"
|
|
|
|
