|
|
Description:
|
etherIpAddress OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS deprecated
DESCRIPTION
"The IP address of this Ethernet interface. The default value
for this object is 0.0.0.0. If either the etherIpAddress or
etherSubnetMask are 0.0.0.0, then when the device boots, it will
use BOOTP to try to figure out what these values should be.
Otherwise, if BOOTP fails, before the device can talk on the
network, this value must be configured through a terminal
attached to the device."
-- DEFVAL {0.0.0.0}
|
|
Disclaimer: The owner of this site does not warrant or assume any liability or responsibility for the accuracy, completeness, or usefulness of any information available on this page (for more information, please read the complete disclaimer).
All rights reserved © 2007-2025 |