|
|
Description:
|
scan-calibration-error OBJECT-TYPE
SYNTAX INTEGER {eNoError(1), eUnknownCalibrationError(2), eScannerFeederEmpty(3), eLowMemory(4), eWriteFailed(5), eScannerBusy(6), eADFMispick(7), eADFJam(8), eUncorrectablePixels(9)}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Error status of the most recent calibration session.
eNoError(1) - The calibation was successful.
eUnknownCalibrationError(2) - An unknown error
occurred.
eScannerFeederEmpty(3) - The feeder contained nothing to
scan.
eLowMemory(4) - Insufficient memory available to
complete the calibration.
eWriteFailed(5) - Write to NVRAM failure.
eScannerBusy(6) - Scanner is busy.
Detailed information about the cause and remedy for each
error should be documented in the device POS.
Additional information:
This object was originally defined for use on
HP LaserJet 1100. We are proposing the new enums number 7-9.
Note: Option 9 would only be set during a factory calibration
to indicate that at least one pixel was not correctable by
the digital calibration factors."
|
|
|
|
