|
|
Description:
|
error1-code OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS optional
DESCRIPTION
"Contains a device specific error code. Each device POS should
list what errors are logged to the error log and the meaning of
each supported error code value.
Additional information:
Returns a device specific error code. If
the error code returned is '0', then the printer has not
yet logged an error for this object. When the maximum
number of errors is reached (10 on the
product), and a new error occurs, the error in
ERROR1-CODE will be replaced by the one in ERROR2-CODE,
and so on until the last error object will be given the
value of the new error.
The error category is returned in the upper 16 bits,
either 79 (for service) or 0 (for support). The lower
16 bits encodes the specific error. If an error is not
a 79 service error, the value of this object is the PJL
USTATUS code. If it is a 79 service error, the lower 16
bits contain the PJL USTATUS code.
The types of errors reported for the product are:
49 Service Error
50-67 Service Error
69 Service Error
70-72 Service Error
79 Service Errors
Access Error
Address Error
ASIC fault
Asserts
Bad Beam Detect
Bad E-Label
Bad Fan
Bad Fuser
Bad Malfunction
Bad MIO
Bad Scanner Motor
Data Communication Error
Engine Communication Error
Format Error
Genunine HP Supply Installed
Illegal Instruction
Insufficient Memory
Invalid Personality
Laser Malfunction
MIO Buffer Overflow
MIO Connection Break
Missing E-Label
Non-HP Supply Detected
NVRAM Error
NVRAM Service Error
Parallel Buffer Overflow
Print Page Punt
Priviledge Violation
Trace Fault
Unimplemented Line-a Opcode
Unimplemented Line-f Opcode
Uninitialized Interrupt"
|
|
Disclaimer: The owner of this site does not warrant or assume any liability or responsibility for the accuracy, completeness, or usefulness of any information available on this page (for more information, please read the complete disclaimer).
All rights reserved © 2007-2024 |