|
|
Description:
|
hpnicfCBQoSMatchRuleIntValue1 OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Value of Match Rule.
IPv4 ACL: 2000~5999
IPv6 ACL: 2000~3999; 10000~42767
Software QoS: 2000~3999
Hardware Qos: 10000~42767
RtpPort: start-port: 2000~65535
IpPrec: value: 0~7, up to 8 values can be input. The bit set to
1 of the last 8 bits of hpnicfCBQoSMatchRuleIntValue1 is
used to indicate the value 0~7.
for example: 0x53(Binary format is 01010011)
means the match rule is 'if-match ip-prec 0 1 4 6'
Dscp: value:0~63, up to 8 values can be input.
The bit set to 1 of hpnicfCBQoSMatchRuleIntValue1 is used
to indicate the value 32~63.
The bit set to 1 of hpnicfCBQoSMatchRuleIntValue2 is used to
indicate the value 0~31.
for example: 0x80000003 means the match rule is 'if-match
dscp 32 33 63'
Vlan8021p: value:0~7, up to 8 values can be input. The bit set
to 1 of the last 8 bits of hpnicfCBQoSMatchRuleIntValue1
is used to indicate the value 0~7.
for example: 0x53(Binary format is 01010011) means the
match rule is 'if-match customer-dot1p 0 1 4 6'
MplsExp: value:0~7, up to 8 values can be input. The bit set to 1
of the last 8 bits of hpnicfCBQoSMatchRuleIntValue1 is used
to indicate the 8 value 0~7.
for example: 0x53(Binary format is 01010011) means the
match rule is 'if-match mpls 0 1 4 6'
SourceIp: 1~4095
QosLocalID: 1~4095
AtmClp: 0~1
FrDe: 0~1
LocalPrecedence: 0~7, up to 8 values can be input. The bit set to
1 of the last 8 bits of hpnicfCBQoSMatchRuleIntValue1
is used to indicate the value 0~7.
for example: 0x53(Binary format is 01010011) means the match
rule is 'if-match localprecedence 0 1 4 6'
DropPriority: 0~2, up to 3 values can be input. The bit set to 1
of the last 3 bits of hpnicfCBQoSMatchRuleIntValue1 is
used to indicate the value 0~2.
ServiceDot1p: 0~7, up to 8 values can be input.
The bit set to 1 of the last 8 bits of
hpnicfCBQoSMatchRuleIntValue1 is used to indicate
the value 0~7.
for example: 0x53(Binary format is 01010011) means the match
rule is 'if-match service-dot1p 0 1 4 6'
SecondMplsExp: value:0~7, up to 8 values can be input. The bit
set to 1 of the last 8 bits of hpnicfCBQoSMatchRuleIntValue1
is used to indicate the 8 value 0~7.
for example: 0x53(Binary format is 01010011) means the
match rule is 'if-match mpls 0 1 4 6'
PacketLength: 1~2000. hpnicfCBQoSMatchRuleIntValue1 is used to
indicate the minimum value, hpnicfCBQoSMatchRuleIntValue2
is used to indicate the maximum value.
ForwardingLayer: {bridge(1), route(2)}
other types: Set is not permitted. 0xffffffff will be returned
when getting."
|
|
|
|
