|
|
Description:
|
ipv6IfOperStatus OBJECT-TYPE
SYNTAX INTEGER {
up(1), -- ready to pass packets
down(2),
noIfIdentifier(3), -- no interface identifier
unknown(4), -- status can not be determined for some reason
notPresent(5) -- some component is missing
}
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The current operational state of the interface.
The noIfIdentifier(3) state indicates that no valid Interface Identifier is assigned to the interface.
This state usually indicates that the link-local interface address failed Duplicate Address Detection.
If ipv6IfAdminStatus is down(2) then ipv6IfOperStatus should be down(2). If ipv6IfAdminStatus is changed to up(1) then ipv6IfOperStatus should change to up(1) if the interface is ready to transmit and receive network traffic; it should remain in the down(2) or noIfIdentifier(3) state if and only if there is a fault that prevents it from going to the up(1) state; it should remain in the notPresent(5) state if the interface has missing (typically, lower layer) components.
This object is obsolete. IPv6 does not have a separate operational status; the operational status of the interface is represented by IF-MIB::ifOperStatus."
|
|
|
|
Information:
|
Automatically extracted from IETF RFC 8096.
|
|
