|
|
Description:
|
pwMplsModuleReadOnlyCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for agents that provide read-
only support for the PW-MPLS-STD-MIB module. Such
devices can then be monitored but cannot be configured
using this MIB module."
MODULE -- this module
MANDATORY-GROUPS {pwMplsGroup, pwMplsOutboundMainGroup, pwMplsInboundGroup, pwMplsMappingGroup}
GROUP pwMplsOutboundTeGroup
DESCRIPTION
"This group MUST be supported if the implementation
allows MPLS-TE tunnels to carry PW traffic."
OBJECT pwMplsMplsType
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required.
Support of pwOnly(2) is not required. At least one
of mplsTe(0) or mplsNonTe(1) MUST be supported if
signaling of PW is supported."
OBJECT pwMplsExpBitsMode
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required.
Support of specifiedValue(2) and serviceDependant(3)
is optional."
OBJECT pwMplsExpBits
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT pwMplsTtl
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT pwMplsLocalLdpID
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT pwMplsLocalLdpEntityIndex
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT pwMplsStorageType
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT pwMplsOutboundLsrXcIndex
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required.
A value other than zero MUST be supported if the
implementation supports non-TE signaling of the
outer tunnel."
OBJECT pwMplsOutboundTunnelIndex
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT pwMplsOutboundTunnelLclLSR
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT pwMplsOutboundTunnelPeerLSR
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT pwMplsOutboundIfIndex
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required.
A value other than zero MUST be supported if the
implementation supports manually configured PW
without MPLS outer tunnel."
|
|
|
|
Information:
|
Automatically extracted from IETF RFC 5602.
|
|
|
|
