|
|
Description:
|
pwMplsModuleFullCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for agents that provide full
support for the PW-MPLS-STD-MIB module. Such devices
can then be monitored and also be configured using
this MIB module."
MODULE -- this module
MANDATORY-GROUPS {pwMplsGroup, pwMplsOutboundMainGroup, pwMplsInboundGroup, pwMplsMappingGroup}
GROUP pwMplsOutboundTeGroup
DESCRIPTION
"This group MUST be supported if the implementation
allows MPLS-TE tunnels to carry PW traffic."
OBJECT pwMplsMplsType
DESCRIPTION
"Support of pwOnly(2) is not required. At least one
of mplsTe(0) or mplsNonTe(1) MUST be supported if
signaling of PW is supported."
OBJECT pwMplsExpBitsMode
DESCRIPTION
"Support of specifiedValue(2) and
serviceDependant(3) is optional."
OBJECT pwMplsLocalLdpID
MIN-ACCESS read-only
DESCRIPTION
"A read-write access is required if the
implementation supports more than one LDP entity
identifier for PW signaling."
OBJECT pwMplsLocalLdpEntityIndex
MIN-ACCESS read-only
DESCRIPTION
"A read-write access is required if the
implementation supports more than one LDP entity
index for PW signaling."
OBJECT pwMplsOutboundLsrXcIndex
MIN-ACCESS read-only
DESCRIPTION
"A value other than zero MUST be supported if the
implementation supports non-TE signaling of the
outer tunnel.
A read-write access MUST be supported if the
implementation supports PW label manual setting
and carrying them over non-TE tunnels."
OBJECT pwMplsOutboundIfIndex
MIN-ACCESS read-only
DESCRIPTION
"A value other than zero and read-write operations
MUST be supported if the implementation supports
manually configured PW without MPLS outer tunnel."
|
|
|
|
Information:
|
Automatically extracted from IETF RFC 5602.
|
|
|
|
