|
Description:
|
dot1dStaticDenyTable OBJECT-TYPE
SYNTAX SEQUENCE OF Dot1dStaticDenyEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The dot1dStaticDenyTable contains filtering information
configured into the bridge by (local or network)
management specifying the set of ports to which frames
received from specific ports and containing specific
destination addresses are denied to be forwarded. The value
of zero in this table as the port number from which
frames with a specific destination address are received, is
used to specify all ports for which there is no specific
entry in this table for that particular destination address.
Entries are valid for unicast and for group/broadcast
addresses.
Creating entries: Entries are created by assigning values
to both the dot1dStaticDenySrcIfIndex and
dot1dStaticDenyDstIfIndex objects within one
operation (i.e on one command line).
Deleting entries: To remove an entry, the
dot1dStaticDenyStatus must be set to 'delete'."
REFERENCE
"IEEE 802.1D-1990: Section 6.7.2"
|
|
|