|
|
Description:
|
adslLineGlitePowerState OBJECT-TYPE
SYNTAX INTEGER {
none(1),
l0(2), -- L0 Power on
l1(3), -- L1 Power on but reduced
l3(4) -- L3 Power off
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object specifies the power
state of this interface. L0 is power on, L1 is
power on but reduced and L3 is power off. Power
state cannot be configured by an operator but it
can be viewed via the ifOperStatus object for the
managed ADSL interface. The value of the object
ifOperStatus is set to down(2) if the ADSL
interface is in power state L3 and is set to up(1)
if the ADSL line interface is in power state L0 or
L1. If the object adslLineTransAtucActual is set to
a G.992.2 (G.Lite)-type transmission mode, the
value of this object will be one of the valid power
states: L0(2), L1(3), or L3(4). Otherwise, its
value will be none(1)."
|
|
|
|
Information:
|
Automatically extracted from IETF RFC 3440.
|
|
