Main page
OID Repository
https://oid-base.com
Display OID:

{iso(1) identified-organization(3) dod(6) internet(1) mgmt(2) mib-2(1) transmission(10) vdsl2MIB(251) xdsl2Objects(1) xdsl2Profile(5) xdsl2ProfileLine(1) xdsl2LineConfProfTable(2) xdsl2LineConfProfEntry(1) xdsl2LConfProfDpboEsEL(37)}

xdsl2LConfProfDpboEsEL(37)

 
 

OID description



   
OID: (ASN.1 notation)
(dot notation)
(OID-IRI notation)

Description:

xdsl2LConfProfDpboEsEL OBJECT-TYPE
SYNTAX Unsigned32 (0..511)
UNITS "0.5 dB"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This configuration parameter defines the assumed electrical
length of cables (E-side cables) connecting exchange-based DSL
services to a remote flexibility point (cabinet), that hosts the
xTU-C that is subject to spectrally shaped downstream power back-
off (DPBO) depending on this length. The electrical length is
defined as the loss (in dB) of an equivalent length of
hypothetical cable at a reference frequency defined by the
network operator or in spectrum management regulations.
This parameter shall be coded as an unsigned integer representing
an electrical length from 0 dB (coded as 0) to 255.5 dB (coded as
511) in steps of 0.5 dB. All values in the range are valid. If
this parameter is set to '0', the DPBO shall be disabled."
REFERENCE "ITU-T G.997.1, paragraph #7.3.1.2.13 (DPBOESEL)"
DEFVAL { 0 }



Information:

Automatically extracted from IETF RFC 5650.

 
 
Short link:


Parent OID: xdsl2LineConfProfEntry(1) First sibling OID: xdsl2LConfProfProfileName(1) Previous sibling OID: xdsl2LConfProfDpboEPsd(36) Next sibling OID: xdsl2LConfProfDpboEsCableModelA(38) Last sibling OID: xdsl2LConfProfRowStatus(48)