Main page
OID Repository
https://oid-base.com
Display OID:

Action itemiso(1) Action itemidentified-organization(3) Action itemdod(6) Action iteminternet(1) Action itemmgmt(2) Action itemmib-2(1) Action itemtransmission(10) Action itemadsl2MIB(238) Action itemadsl2(1) Action itemadsl2Profile(5) Action itemadsl2ProfileLine(1) Action itemadsl2LineConfProfModeSpecTable(3) Action itemadsl2LineConfProfModeSpecEntry(1)

adsl2LConfProfPsdMaskDs(7)


Navigating the OID tree
Separation line
OID description

 
Action itemFormat of this page
Action itemModify this OID
Action itemCreate child OID
Action itemCreate sibling OID
OID: (ASN.1 notation)
(dot notation)
(OID-IRI notation)

Description:

adsl2LConfProfPsdMaskDs OBJECT-TYPE
SYNTAX Adsl2PsdMaskDs
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The downstream PSD mask applicable at the U-C2 reference
point.
This parameter is used only for G.992.5, and it may impose PSD
restrictions (breakpoints) in addition to the Limit PSD mask
defined in G.992.5.
This is a string of 32 pairs of values in the following
structure:
Octets 0+1 - Index of 1st sub-carrier used in the context
of a first breakpoint.
Octet 2 - The PSD reduction for the sub-carrier indicated in
octets 0 and 1.
Octets 3-5 - Same, for a 2nd breakpoint.
Octets 6-8 - Same, for a 3rd breakpoint.
This architecture continues until octets 94-95, which are
associated with a 32nd breakpoint.
Each subcarrier index is an unsigned number in the range 1 to
NSCds. Each PSD reduction value is in the range 0 (0dBm/Hz) to
255 (-127.5dBm/Hz) with steps of 0.5dBm/Hz. Valid values are
in the range 0 to 190 (0 to -95dBm/Hz).
When the number of breakpoints is less than 32, all remaining
octets are set to the value 0. Note that the content of this
object should be correlated with the sub-carriers mask and with
the RFI setup."
REFERENCE "ITU-T G.997.1, paragraph 7.3.1.2"



Classification:

MIB object for network management

See classes of OIDs

Information:

Automatically extracted from IETF RFC 4706

Separation line
Short URL for this page:
Separation line

Disclaimer: The owner of this site does not warrant or assume any liability or responsibility for the accuracy, completeness, or usefulness of any information available on this page (for more information, please read the complete disclaimer).
All rights reserved © 2007-2025
Parent OID: adsl2LineConfProfModeSpecEntry(1) First sibling OID: adsl2LConfProfAdslMode(1) Previous sibling OID: adsl2LConfProfMaxAggRxPwrUs(6) Next sibling OID: adsl2LConfProfPsdMaskUs(8) Last sibling OID: adsl2LConfProfModeSpecRowStatus(10) Separation line
Chatbot helper Webmaster Bullet 11 Feb 2020 Bullet Page top