|
|
Description:
|
mplsFTNModuleReadOnlyCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"Compliance requirement for implementations that only
provide read-only support for MPLS-FTN-STD-MIB. Such
devices can then be monitored but cannot be configured
using this MIB module."
MODULE IF-MIB -- The interfaces Group MIB, RFC 2863
MANDATORY-GROUPS {
ifGeneralInformationGroup,
ifCounterDiscontinuityGroup
}
MODULE -- This module
MANDATORY-GROUPS {
mplsFTNRuleGroup,
mplsFTNMapGroup,
mplsFTNPerfGroup
}
OBJECT mplsFTNIndexNext
MIN-ACCESS not-accessible
DESCRIPTION
"This object is not needed when mplsFTNTable is
implemented as read-only."
OBJECT mplsFTNRowStatus
SYNTAX RowStatus { active(1) }
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required, and active is the only
status that needs to be supported."
OBJECT mplsFTNDescr
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT mplsFTNMask
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT mplsFTNAddrType
SYNTAX InetAddressType { ipv4(1), ipv6(2) }
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required. An implementation is only
required to support IPv4 and IPv6 addresses."
OBJECT mplsFTNSourceAddrMin
SYNTAX InetAddress (SIZE (4 | 20))
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required. An implementation is only
required to support IPv4 and IPv6 addresses."
OBJECT mplsFTNSourceAddrMax
SYNTAX InetAddress (SIZE (4 | 20))
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required. An implementation is only
required to support IPv4 and IPv6 addresses."
OBJECT mplsFTNDestAddrMin
SYNTAX InetAddress (SIZE (4 | 20))
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required. An implementation is only
required to support IPv4 and IPv6 addresses."
OBJECT mplsFTNDestAddrMax
SYNTAX InetAddress (SIZE (4 | 20))
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required. An implementation is only
required to support IPv4 and IPv6 addresses."
OBJECT mplsFTNSourcePortMin
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT mplsFTNSourcePortMax
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT mplsFTNDestPortMin
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT mplsFTNDestPortMax
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT mplsFTNProtocol
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT mplsFTNActionType
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT mplsFTNActionPointer
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT mplsFTNDscp
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT mplsFTNStorageType
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT mplsFTNMapRowStatus
SYNTAX RowStatus { active(1) }
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required, and active(1) is the only
status that needs to be supported."
OBJECT mplsFTNMapStorageType
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
|
|
|
|
Information:
|
Automatically extracted from IETF RFC 3814.
|
|
iso(1)
